The SmallRig 1138 camera clamp review centers on a compact mount for creators who need to position small camera accessories without drilling into a surface.
Its clamp, dual ball head, 1/4-inch screw, and included action-camera adapter make it a practical choice for desk, vehicle, and rig setups.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A flexible mounting option for creators who need to attach a compact camera, monitor, light, or microphone to a rod, table, or frame.
- Dual ball head with a 1/4-inch-20 screw for attaching compatible cameras and accessories.
- Clamp can attach to a rod, tube, table, frame, or tripod, without drilling.
- Listed maximum weight capacity is 1.5 kg; treat it as a limit rather than a target for everyday use.
- Aluminum and stainless-steel construction, with an item weight of about 0.2 kg.
Pros
- Clamps to multiple types of supports, which can open up mounting positions beyond a camera cage or tripod.
- The dual ball head and locking knob offer an adjustable way to position attached gear.
Consider before buying
- The 1.5 kg maximum capacity calls for caution with heavier gear or accessories that extend far from the clamp.
- The clamp needs a compatible support surface; check the diameter or thickness of the intended mounting point before buying.
Read the full review summary
The 1138 combines a gripping clamp with a dual ball head and a 1/4-inch-20 screw, so a compatible camera or accessory can be attached to a rod, tube, table, frame, or tripod.
The design is intended to help place gear where a standard camera shoe or tripod socket is not convenient, while its stated maximum load capacity is 1.5 kg.
That figure is a ceiling, so buyers should leave room below it and consider the accessory's shape and leverage as well as its weight.
This mount is best suited to creators building a compact, adaptable setup for a webcam, action camera, small monitor, light, or microphone.
The included action-camera adapter broadens its use, and the aluminum and stainless-steel construction keeps the assembly relatively compact at about 0.2 kg.
For moving rigs or vehicle use, the product guidance calls for a safety rope; buyers should plan for that extra restraint when the camera could be exposed to movement.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
It combines a clamp, dual ball head, and 1/4-inch-20 screw for mounting on several kinds of supports.
Accessory compatibility
The design supports a range of small gear, and the package includes an action-camera mount adapter.
Load guidance
The stated 1.5 kg maximum is useful guidance, though buyers should account for leverage and dynamic movement.
Portability
At about 0.2 kg and roughly 3.74 by 3.35 by 0.98 inches, it is compact enough for a kit bag.
Build materials
Aluminum and stainless steel are specified for the clamp assembly.
Setup simplicity
A locking knob and no-drill clamping approach can simplify placement on compatible surfaces.
Key Features and Specifications of SmallRig 1138 Clamp
- Dual ball head with a 1/4-inch-20 screw for attaching compatible cameras and accessories.
- Clamp can attach to a rod, tube, table, frame, or tripod, without drilling.
- Listed maximum weight capacity is 1.5 kg; treat it as a limit rather than a target for everyday use.
- Aluminum and stainless-steel construction, with an item weight of about 0.2 kg.
- Package includes a super camera clamp and an action-camera mount adapter.
- Product dimensions are approximately 3.74 by 3.35 by 0.98 inches.
- The guidance recommends attaching a safety rope in dynamic shooting situations.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Clamps to multiple types of supports, which can open up mounting positions beyond a camera cage or tripod.
- The dual ball head and locking knob offer an adjustable way to position attached gear.
- An action-camera adapter is included, alongside the 1/4-inch-20 mounting point.
- Metal construction and a compact footprint suit a portable accessory kit.
Consider before buying
- The 1.5 kg maximum capacity calls for caution with heavier gear or accessories that extend far from the clamp.
- The clamp needs a compatible support surface; check the diameter or thickness of the intended mounting point before buying.
- For moving setups, buyers need to provide and use a safety rope as an additional restraint.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the SmallRig 1138 if you routinely need to attach a compact camera accessory to a desk edge, tube, rod, frame, or similar support.
Its clamp-based mounting and 1/4-inch-20 screw give it a useful role in small creator setups, and the included action-camera adapter can reduce the need to source a separate connection for that style of camera.
It also makes sense when adjustability matters more than a fixed shoe or single-purpose mount.
Before committing, check that the support surface fits the clamp and that the combined device and accessories remain comfortably below the 1.5 kg maximum.
Think about how far the device will project from the clamp: a long arm can increase leverage even when the overall weight seems modest.
For shooting around a vehicle or any setup that can move, use the recommended safety rope and confirm that the clamp is firmly locked before placing equipment.
This is a versatile positioning accessory for compact gear, but it should be treated as one part of a secure mounting arrangement.
Who should skip it
Skip it if your setup requires a mount rated above 1.5 kg, a dedicated mounting interface that does not match the clamp and 1/4-inch-20 screw, or a permanent installation.
Buyers who cannot add a safety rope in a moving or dynamic setup should choose a mounting approach better suited to that routine.
How the SmallRig 1138 Clamp Fits a Compact Rig
A clamp expands placement options
The main advantage is being able to secure the mount to a range of supports, including rods, tubes, tables, frames, and tripods.
That gives creators more options for positioning a webcam, microphone, light, or small camera where a flat tabletop or conventional camera mount is not available.
The tradeoff is that each support must be a sensible fit for the clamp; check the actual mounting point before planning a setup.
Ball-head adjustment favors flexible framing
The dual ball-head arrangement and locking knob are intended to help orient an attached device and hold its position.
This is useful when a small monitor or light needs a particular angle, or when an action camera is mounted off the main rig.
The practical limit is the combination of weight and reach: keep the load below the stated maximum and avoid assuming that a long extension will feel as stable as a close, compact placement.
Capacity and movement need a conservative approach
A 1.5 kg maximum gives a clear upper boundary for planning, but the clamp's suitability also depends on the accessory's shape, support surface, and whether the rig is stationary.
The product guidance specifically recommends a safety rope for dynamic scenarios. That makes the 1138 a stronger fit for controlled desk or rig positioning, or for moving applications where a secondary restraint is practical.
Small details shape the kit value
The aluminum and stainless-steel construction, approximate 0.2 kg weight, and included action-camera adapter make this a compact, multi-use accessory rather than a large support system. The 1/4-inch-20 connection also gives it a familiar interface for compatible gear.
Buyers should still inventory their own equipment connections and intended support surfaces so the clamp solves a real placement problem rather than adding an adapter they do not need.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the 1138 for a more compact clamp-and-head assembly with an action-camera adapter. The 2732 is a better fit when you specifically need an articulating arm to extend gear away from the clamped support.
- The 2732 pairs a super clamp with a 9.8-inch articulating arm, provides 1/4-inch and 3/8-inch clamp threads, and has a 1/4-inch screw on each end of the arm.
- Its clamp opens from 15 mm to 54 mm.
- The 1138 combines a clamp and dual ball head in a compact mount, with a 1.5 kg maximum load and an included action-camera adapter.
Camera Mounts & Clamps alternative

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
Choose the 1138 when you want a clamp with an integrated adjustable head and action-camera adapter. The standalone SmallRig Super Clamp suits buyers who need the clamp's threaded mounting points and already have a separate head or arm.
- This super clamp has 1/4-inch and 3/8-inch threaded holes, rubber pads, and jaws that open from 15 mm to about 40 mm; the package includes the clamp alone.
- The 1138 includes a dual ball head and 1/4-inch-20 screw for attaching and angling compatible gear, as well as an action-camera adapter.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 is worth considering for creators who need a compact way to position small accessories on a rod, tube, desk, frame, or tripod.
Its dual ball head, 1/4-inch-20 connection, metal construction, and included action-camera adapter make it adaptable across several simple rigging tasks.
Buy it if your gear fits the mounting interface and stays comfortably below the 1.5 kg maximum.
Check the clamp's fit against your support point, and use a safety rope for dynamic setups; those practical limits matter as much as the mount's flexibility.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A flexible mounting option for creators who need to attach a compact camera, monitor, light, or microphone to a rod, table, or frame.
- Dual ball head with a 1/4-inch-20 screw for attaching compatible cameras and accessories.
- Clamp can attach to a rod, tube, table, frame, or tripod, without drilling.
- Listed maximum weight capacity is 1.5 kg; treat it as a limit rather than a target for everyday use.
- Aluminum and stainless-steel construction, with an item weight of about 0.2 kg.